UCL  IRIS
Institutional Research Information Service
UCL Logo
Please report any queries concerning the funding data shown on the profile page to:

http://www.ucl.ac.uk/finance/secure/research/post_award
Please report any queries concerning the student data shown on the profile page to:

Email: portico-services@ucl.ac.uk

Help Desk: http://www.ucl.ac.uk/ras/portico/helpdesk
Publication Detail
Dynamic compressive strength properties of aluminium foams. Part I - experimental data and observations
  • Publication Type:
    Journal article
  • Publication Sub Type:
    Article
  • Authors:
    Tan PJ, Reid SR, Harrigan JJ, Zou Z, Li S
  • Publisher:
    PERGAMON-ELSEVIER SCIENCE LTD
  • Publication date:
    10/2005
  • Pagination:
    2174, 2205
  • Journal:
    J MECH PHYS SOLIDS
  • Volume:
    53
  • Issue:
    10
  • Print ISSN:
    0022-5096
  • Language:
    EN
  • Keywords:
    foams, dynamic properties, size and length effects, strain rate, steady-shock wave, HOPKINSON PRESSURE BAR, STRAIN-RATE, INERTIA, HONEYCOMB, SOLIDS, IMPACT, WAVE
  • Addresses:
    Univ Manchester
    Sch Mech Aerosp & Civil Engn
    Manchester
    M60 1QD
    Lancs
    England
Abstract
This study of the dynamic compressive strength properties of metal foams is in two parts. Part I presents data from an extensive experimental study of closed-cell Hydro/Cymat aluminium foam, which elucidates a number of key issues and phenomena. Part II focuses on modelling issues.The dynamic compressive response of the foam was investigated using a direct-impact technique for a range of velocities from 10 to 210 ms(-1). Elastic wave dispersion and attenuation in the pressure bar was corrected using a deconvolution technique.A new method of locating the point of densification in the nominal stress-strain curves of the foam is proposed, which provides a consistent framework for the definition of the plateau stress and the densification strain, both essential parameters of the 'shock' model in Part II. Data for the uniaxial, plastic collapse and plateau stresses are presented for two different average cell sizes of approximately 4 and 14 mm. They show that the plastic collapse strength of the foam changes significantly with compression rate. This phenomenon is discussed, and the distinctive roles of microinertia and 'shock' formation are described. The effects of compression rates on the initiation, development and distribution of cell crushing are also examined. Tests were carried out to examine the effects of density gradient and specimen gauge length at different rates of compression and the results are discussed. The origin of the conflicting conclusions in the literature on the correlation between nominal strain rate epsilon (ratio of the impact velocity V-i to the initial gauge length l(o) of the specimen) and the dynamic strength of aluminium alloy foams is identified and explained. (c) 2005 Elsevier Ltd. All rights reserved.
Publication data is maintained in RPS. Visit https://rps.ucl.ac.uk
 More search options
UCL Authors
Dept of Mechanical Engineering
University College London - Gower Street - London - WC1E 6BT Tel:+44 (0)20 7679 2000

© UCL 1999–2011

Search by